meridiani.planum
06-20 12:18 PM
I would like to appeal to all the people who want to travel outside the country and would need a new visa stamp to come back to US....please...please...please do not take this risk unless it is a family emergency (a life and death situation rather than a brother,sister getting married).
Cant attend own brothers wedding because we are scared of the possibility of MAYBE getting a delayed visa stamping?? what kind of life is that? ....
Cant attend own brothers wedding because we are scared of the possibility of MAYBE getting a delayed visa stamping?? what kind of life is that? ....
wallpaper On Dancing with Stars!
Munna Bhai
01-18 01:08 PM
and trust me they will find one....
BTW - Canadian Dollar is doing better that USD...!!!!
If they can find some reason to deny that's fine.In that case they will find another reason to deny "GC approved" cases too!! Let's not be so negative about everything.
BTW - Canadian Dollar is doing better that USD...!!!!
If they can find some reason to deny that's fine.In that case they will find another reason to deny "GC approved" cases too!! Let's not be so negative about everything.
pinky001
09-18 03:51 AM
I am planning to attend an Visa interview, at present I am on H4 status.
My case is: Gor H4 in sept 2006 - April 2008, and got stamping
Later got H1 from Oct 2007 to oct 2010, and got stamping
Present Got H4 from sept 2009 to may 2011 and no stamping yet and hence planning to go for stamping
Question 1) But when I am selcting the appontment date it ask's for a question
" Are you applying for same visa class that expired in the last 12 months?" so In my case would it be yes or no?
2) Does H4 and H1 come under same Visa Class?
please reply ASAP, As I am planning to schedule an appt immediately
I am planning to attend an Visa interview, at present I am on H4 status.
My case is: Gor H4 in sept 2006 - April 2008, and got stamping
Later got H1 from Oct 2007 to oct 2010, and got stamping
Present Got H4 from sept 2009 to may 2011 and no stamping yet and hence planning to go for stamping
Question 1) But when I am selcting the appontment date it ask's for a question
" Are you applying for same visa class that expired in the last 12 months?" so In my case would it be yes or no?
2) Does H4 and H1 come under same Visa Class?
please reply ASAP, As I am planning to schedule an appt immediately
My case is: Gor H4 in sept 2006 - April 2008, and got stamping
Later got H1 from Oct 2007 to oct 2010, and got stamping
Present Got H4 from sept 2009 to may 2011 and no stamping yet and hence planning to go for stamping
Question 1) But when I am selcting the appontment date it ask's for a question
" Are you applying for same visa class that expired in the last 12 months?" so In my case would it be yes or no?
2) Does H4 and H1 come under same Visa Class?
please reply ASAP, As I am planning to schedule an appt immediately
I am planning to attend an Visa interview, at present I am on H4 status.
My case is: Gor H4 in sept 2006 - April 2008, and got stamping
Later got H1 from Oct 2007 to oct 2010, and got stamping
Present Got H4 from sept 2009 to may 2011 and no stamping yet and hence planning to go for stamping
Question 1) But when I am selcting the appontment date it ask's for a question
" Are you applying for same visa class that expired in the last 12 months?" so In my case would it be yes or no?
2) Does H4 and H1 come under same Visa Class?
please reply ASAP, As I am planning to schedule an appt immediately
2011 Dancing with the Stars,
ras
09-19 10:11 AM
That's what I am suggesting. Look back the first reply message. One doesn't gain authority and yell on others just because the person attended the rally.
more...
gaz
02-04 01:11 AM
I just got the H1 Approval for 1 year and 2 months (1 year H1 Extension and 2 months recapture time). I am currently in Malaysia and need to apply for a visa at US Consulate in Malaysia. Since I am on the H1 visa, I have to show the proof that I will return back to Malaysia after the end of my work period in US. Accordingly, I would need to purchase the round trip ticket. The issue is that the plane ticket only valid for the maximum of 1 year, but my visa valid for 1 year and 2 months. Please advise if one way plane ticket would be sufficient for the visa interview or need to be a round trip plane ticket. If it is not, what should I do? Also, I wonder if the application package including I-129 submitted to USCIS need to be stamped �Certified True Copy� with the original signature of the lawyer or employer for the visa interview. Can I use the copy one that is stamped �Certified True Copy� with the non-original signatures of my lawyer or employer? Anybody pls help. Thank you very much.
I'm not an attorney - so please treat this as my opinion, and not a definitive statement of fact. Based on my personal experience in India, the one year ticket should be fine - you can always postpone the date of the ticket whenever needed (some airlines charge a fee for it). The proof of return is more like an intent to return.
As for the I129 - my lawyer added no such stamps or certification.
Please do check with your lawyer also. Also, try calling the US consulate.
Good luck.
I'm not an attorney - so please treat this as my opinion, and not a definitive statement of fact. Based on my personal experience in India, the one year ticket should be fine - you can always postpone the date of the ticket whenever needed (some airlines charge a fee for it). The proof of return is more like an intent to return.
As for the I129 - my lawyer added no such stamps or certification.
Please do check with your lawyer also. Also, try calling the US consulate.
Good luck.
Vsach
01-10 06:45 PM
Core maintaining a low profie?;)
more...
immigrationSantosh
02-06 08:29 PM
Hi ->
I got a lawsuit(summons) from my previous Employer ( I quit this consultancy in Oct 2010 ) and got this two days back with below points . I need to respond to them with in 30days. I quit this company has he hasn't paid any bench salary and haven't do any proper marketing - which were force me choose a permanent job.
So could some one please advise me the right lawyer to handle this.I need to answer to this summons and need file a new case against them.
Points that summons contain :
FIRST COUNT : Breach of Contract
Second Count : Tortious Interference
Third Count : Breach of Duty of Good Faith and Fair Dealing
Fourth Count : Unjust Enrichment
Fifth Count :Misrepresentation and Fraud
SIXTH count : Breach of Duty of Loyalty
Really I would you appreciate you guys advise me right way to handle this.
I got a lawsuit(summons) from my previous Employer ( I quit this consultancy in Oct 2010 ) and got this two days back with below points . I need to respond to them with in 30days. I quit this company has he hasn't paid any bench salary and haven't do any proper marketing - which were force me choose a permanent job.
So could some one please advise me the right lawyer to handle this.I need to answer to this summons and need file a new case against them.
Points that summons contain :
FIRST COUNT : Breach of Contract
Second Count : Tortious Interference
Third Count : Breach of Duty of Good Faith and Fair Dealing
Fourth Count : Unjust Enrichment
Fifth Count :Misrepresentation and Fraud
SIXTH count : Breach of Duty of Loyalty
Really I would you appreciate you guys advise me right way to handle this.
2010 Maxim dancing stars images
ksircar
06-21 06:16 PM
I would suggest that before you take more interest in her case, first consult with her husband and make sure it is OK with him ;) ;) You know what I mean, right?:D
Nice reply considering the language of the original posting.
Nice reply considering the language of the original posting.
more...
mikemeyers
11-07 09:35 PM
Hey Guys,
I first entered US on F1 and finished my Master's. I have Master's degree from a US University. I only enrolled in this school because I could not defend my thesis in time to apply for graduation so I have to extend it a semester and before visa nos. get over I applied for H1 under regular quota. Hope this help you more to assess my situation. Please share your opinions. I already have a forum on murthy since last two days but I do not see any responses...
Regards...
I first entered US on F1 and finished my Master's. I have Master's degree from a US University. I only enrolled in this school because I could not defend my thesis in time to apply for graduation so I have to extend it a semester and before visa nos. get over I applied for H1 under regular quota. Hope this help you more to assess my situation. Please share your opinions. I already have a forum on murthy since last two days but I do not see any responses...
Regards...
hair dancing with stars maxim.
Michael chertoff
04-15 10:28 AM
I got my approval y'day from TSC. This marks the end of GC journey. Been with same employer since Aug 1999 ( 9 Long years...........).
Congratulations .....everyone of us will see this day one day....
wow I can imagine how happy you are..enjoy and pray for rest of us.
Congratulations .....everyone of us will see this day one day....
wow I can imagine how happy you are..enjoy and pray for rest of us.
more...
SSNN
04-16 04:13 PM
Should we wait until my PD becomes current, to try to link our aplications? Is that necessary? Is there any danger that my husband's 485 application might get lost if USCIS denies our request to link his case to mine now since my PD is not current?
Don't know if this matters, but just this week, I got a RFE for employment verification. We have now sent necessary documents as requested by the dept.
Don't know if this matters, but just this week, I got a RFE for employment verification. We have now sent necessary documents as requested by the dept.
hot Maxim
milind70
06-21 01:48 PM
My friends recently went to the consulte in Nogales to get their H1B stamped and they told me that we can enter Nogales with out any visa ... You might want to explore that or find any other places that are closer to where u live and do not need a visa to get a new I94 ...
I am in the same boat as u and i donot even have my new passport with me yet ...
GoodLuck ... Hope things work out for you ... do post your experiences when u are done with all this ...
Nogales is in Mexico,i think u require a mexican visa to enter Nogales.
I am in the same boat as u and i donot even have my new passport with me yet ...
GoodLuck ... Hope things work out for you ... do post your experiences when u are done with all this ...
Nogales is in Mexico,i think u require a mexican visa to enter Nogales.
more...
house dancing with stars maxim. ABC Dancing Stars Results Show
ganguteli
03-02 11:28 AM
bump
Why are you spamming the forum by posting bump messages everywhere?
Why are you spamming the forum by posting bump messages everywhere?
tattoo dancing with stars maxim. kim
pmpforgc
11-01 02:49 PM
Dear Friends
My I-140 (Sch-A cat-II, recipt date 08/24/2006, upgraded to premium on Oct-25) got approved on Oct-30, 2006
My I-485 was also filed concurrently. I already got finger printed 09/06/06 and there were LUDs on I-485s after that on O9/07/06 and 09/14/06.
After my I-140 approval on Oct-30, My and my families I-485s has LUDs on 10/31/06 and 11/1/06.
Based on your experience, does the recent LUDs on my I-485s suggest some type of approval process?
Can you share your expereiences and knowledge and tell me what these recent LUDs on my I-485s means?
thanks
My I-140 (Sch-A cat-II, recipt date 08/24/2006, upgraded to premium on Oct-25) got approved on Oct-30, 2006
My I-485 was also filed concurrently. I already got finger printed 09/06/06 and there were LUDs on I-485s after that on O9/07/06 and 09/14/06.
After my I-140 approval on Oct-30, My and my families I-485s has LUDs on 10/31/06 and 11/1/06.
Based on your experience, does the recent LUDs on my I-485s suggest some type of approval process?
Can you share your expereiences and knowledge and tell me what these recent LUDs on my I-485s means?
thanks
more...
pictures “dancing with the stars”
hivicks
04-07 05:02 PM
Thanks that helps!- so you filled the G-639 form and had to wait for almost 8 months to get a copy of the I-140 approval notice.
dresses Maksim Moves On
Administrator2
03-23 03:03 PM
We have a media opportunity with Washington Post. We are looking for someone who was offered a job at a company that accepted TARP funding, and later the company had to rescind the job offer due to the restrictionist amendment by Sen. Sanders (/Grassley).
If you or someone you know fits this profile, please contact us immediately at info@immigrationvoice.org
The turn around time for this story is 24 hours.
Thanks,
P.S.: Please help us to keep this thread at the top for next 24 hours.
If you or someone you know fits this profile, please contact us immediately at info@immigrationvoice.org
The turn around time for this story is 24 hours.
Thanks,
P.S.: Please help us to keep this thread at the top for next 24 hours.
more...
makeup “Dancing with the Stars”
nixstor
08-23 12:16 PM
I see a lot of people flocking into "Orkut". How about incorporating a dose of IV through orkut if some of us are already there? What is more important is, making people aware of the consequences they might have to face, even if they havent filed for their GC yet.
girlfriend dancing with the stars
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
hairstyles #39;Dancing With The Stars#39;
admin
01-05 08:04 AM
The $100 was just mentioned in passing. Please contribute more if you want to get really involved in this effort.
ps57002
10-17 10:00 PM
Hi Ps57002 good to see you here.
I saw you in . I was h12GC in .
My case also similar:
PERM Applied - 04/24/2007 - EB3.
Perm Approved - 08/14/2007.
I-140 E-filed - 08/16/2007. Got Online Receipt. Sent the required Documents to USCIS after a week.
I-485/EAD/AP - Posted on 08/16/2007. Included the Online Labor Approval Petition without signatures and Online receipt of I-140.
Received USCIS on 08/17/2007.
Waiting for Receipts.
Don't know whether it will be accepted or will get an RFE.
Hey keep me posted on your status.
I can be reached at sudhakar226@yahoo.com or 862-754-8326.
Good Luck.
UPDATE:
My checks cashed today, got receipts from back of checks...have 4 different receipt numbers, used it to check on uscis...
my concerns..
case was sent to nebraska though should've been texas as employer is in NY, so thought it would be transfered...it wasn't. it shows at nebraska
4 different receipt numbers show 1 case for 140, 1 case for AP, and 2 cases for 485???? 2????... NO EAD. (my check for 485/ead were one check though in it's memo part i put 485/ead). what should i do? now my ead will be delayed cause i have no case for that.
they can't reject a case after cashing checks, right???? i mean they can ask for RFE esp for my missing labor hard copy approval, but not reject. why cash in first place then??? right???
I hope you hear something soon too...keep me updated.
I saw you in . I was h12GC in .
My case also similar:
PERM Applied - 04/24/2007 - EB3.
Perm Approved - 08/14/2007.
I-140 E-filed - 08/16/2007. Got Online Receipt. Sent the required Documents to USCIS after a week.
I-485/EAD/AP - Posted on 08/16/2007. Included the Online Labor Approval Petition without signatures and Online receipt of I-140.
Received USCIS on 08/17/2007.
Waiting for Receipts.
Don't know whether it will be accepted or will get an RFE.
Hey keep me posted on your status.
I can be reached at sudhakar226@yahoo.com or 862-754-8326.
Good Luck.
UPDATE:
My checks cashed today, got receipts from back of checks...have 4 different receipt numbers, used it to check on uscis...
my concerns..
case was sent to nebraska though should've been texas as employer is in NY, so thought it would be transfered...it wasn't. it shows at nebraska
4 different receipt numbers show 1 case for 140, 1 case for AP, and 2 cases for 485???? 2????... NO EAD. (my check for 485/ead were one check though in it's memo part i put 485/ead). what should i do? now my ead will be delayed cause i have no case for that.
they can't reject a case after cashing checks, right???? i mean they can ask for RFE esp for my missing labor hard copy approval, but not reject. why cash in first place then??? right???
I hope you hear something soon too...keep me updated.
ivar
06-18 10:59 PM
Hi,
I came to US in 2004, my H1 visa was sponsored by cognizant technology solutions. H1 was valid from Nov 04 to Dec 06. later on my I 94 was extended from Dec 06 to July 09 .
I changed company and joined wipro in Aug 08 and now my I 94 is now valid till July 2010.
I have never gone back to India for a visit ever since I landed in US (2004)..I now want to go to India for few months and have read that i'll have to get my visa stamped before reentering US...
My question is if i'll have any problems with visa stamping because I was originally working with cognizant and am now working with wipro?..Am I out of status since my original visa expired in 2006 ?...pls help
You have maintained legal status proved by our I94 extensions.. also take all your paystubs for visa stamping to show your job contiunity. You will be good.
I came to US in 2004, my H1 visa was sponsored by cognizant technology solutions. H1 was valid from Nov 04 to Dec 06. later on my I 94 was extended from Dec 06 to July 09 .
I changed company and joined wipro in Aug 08 and now my I 94 is now valid till July 2010.
I have never gone back to India for a visit ever since I landed in US (2004)..I now want to go to India for few months and have read that i'll have to get my visa stamped before reentering US...
My question is if i'll have any problems with visa stamping because I was originally working with cognizant and am now working with wipro?..Am I out of status since my original visa expired in 2006 ?...pls help
You have maintained legal status proved by our I94 extensions.. also take all your paystubs for visa stamping to show your job contiunity. You will be good.
No comments:
Post a Comment